SLIT TYPE & MILLED
TYPE ENVELOPS |
Upto 900 mm NB
(0.5 + 0.5)mm thk/ (0.5 + Gap +0.5)mm thk |
|
 |
| READY CUT GASKETS |
| 1.5 , 2, 3 mm. thick upto 900 mm NB |
|
| BELLOWS/ EXPANSION JOINTS |
Upto 600 mm NB – 300 mm Length |
VALVE COMPONENTS
- BALL VALVE SEATS & SEALS.
- BUTTERFLY VALVE LINERS.
- PLUGE VALVE SLEEVES.
|
| Upto 500 mm Diameter, 1000 mm Length |
| Upto 1000 mm Diameter, 300 mm Length |
|
|
| MECHANICAL SEAL COMPONENTS |
| Upto 1000 mm Diameter, 300 mm Length |
|
| WEAR STRIPS & BEARING PADS |
| Sodium Itched, Dimpled–upto 1200 x 1200mm2 |
|
| ELECTRIC INSULATION BUSHES |
Upto 1000 mm Diameter, 300 mm Length |
| HYDRAULIC &
PNEUMATIC SEALS |
Upto 1000 mm Diameter, 300 mm Length |
| AIR / GAS COMPRESSORS PISTON RINGS |
Upto 1000 mm Diameter, 300 mm Length |
| MECHANICALPACKINGS CHEVRON PACKINGS O/V D/U RINGS,CUP SEALS |
Upto 1000 mm Diameter, 300 mm Length |
PUMP COMPONENTS
- IMPELLERS.
- CASINGS.
- SEALS.
| Upto 1000 mm Diameter, 300 mm Length |
| |
NOTE:
Nonstandard PTFE & Filled PTFE Molded / Machined Components as per specific sizes /drawing can be available, subject to minimum order quantity.
- Machined Components can be available in Standard-Filled Compositions, subject to minimum order quantity.
- 15/25% Glass Filled PTFE.
- 25/35% Carbon Filled PTFE.
- 15% Graphite Filled PTFE.
- 40 / 60% Bronze Filled PTFE.
- 55% Bronze + 5% MOS2 Filled PTFE.
- 15% Glass + 5% MOS2 Filled PTFE.
- Stock Shapes can be available in Non standard – customer specific composition, subject to minimum order quantity.
- Stock Shapes can be available with Sodium Itching / Chemical Treatment, subject to minimum order quantity.
|
